Overview

eSUB states “Waste products can include trash, recycling, and wastewater.” .. I am including by sanitary and storm drain systems under the wastewater umbrella.

HO Sewer/Drain Cover and Ring V1

HO Cover & Ring Fig 1 This is my HO Manhole cover with 'Sewer' on top as printed at Shapeways (Fig 1)- call it "Version 1". The part below the ring is the part that you see as a steel ring when the manhole cover is removed (the base). It is printed upside down so...

Read more ...

1:24 Scale Manhole Cover and Ring

Manhole Covers and Rings I cover them in some detail on another page - Manhole Covers Version 1 Fig 1 This was a test print (Fig 1) to see how much spacing if any between the Base Ring and the Manhole Cover. While the .1mm clearance worked .. it barely did so .. more of...

Read more ...

Catch Basin Lid and Lift

Overview This photo was taken just a block or so from my house. This is the Lid with offset manhole cover to a Catch Basin. There is also a lift sitting on top of the Catch Basin that raises the Lid up about 18" which creates openings for water to enter the storm drain system....

Read more ...

O scale Curb Inlet

Overview I was asked by Anthony P. and Kevin S. to create grates for an O scale storm drain system. Anthony provided photos of one being istalled. Using that as a reference I found this page from Jensen Prcast showing a 24"x36" Curb Inlet with cast iron frame grate, and hood (6th down). There are...

Read more ...

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments